Service Overview
Engineering that covers the whole plant
From piping stress analysis and process engineering to civil and structural design, our disciplines work together so process, equipment, piping, structures, power and instruments fit as one system.

Piping Stress & Supports
We engineer piping systems to perform safely and reliably throughout their operating life. Our focus is on solving complex piping challenges through engineering analysis, sound design practices and practical solutions that address the demands of modern industrial facilities.
Our engineering scope spans piping flexibility studies, static and dynamic assessments, equipment interface evaluations and comprehensive pipe support design. We examine the interaction between piping systems, connected equipment and supporting structures under operating, occasional and abnormal loading conditions to establish reliable design solutions.
From evaluating thermal movements and equipment nozzle loads to addressing vibration, dynamic forces and support constraints, we approach every assignment with a clear understanding of its engineering requirements. Our solutions are developed in accordance with applicable international codes, project specifications and industry practices, with particular emphasis on constructability, maintainability and long-term performance with safety.

Piping Design
We transform process requirements and engineering concepts into coordinated piping layouts that form the foundation of efficient plant operations. Our approach brings together process requirements, equipment arrangement, structural interfaces and operational considerations to develop piping systems that are practical, accessible and technically sound.
Our engineering team focuses on developing optimized routing strategies, establishing equipment connections, evaluating pipe rack arrangements and coordinating interfaces across multiple engineering disciplines. Particular attention is given to equipment accessibility, maintenance clearances, constructability, drainage, venting, flexibility requirements and safe plant operation.
Through intelligent 3D modelling and multidisciplinary coordination, we identify spatial constraints, resolve design conflicts and minimize field modifications before construction. Each layout is developed with consideration for operating conditions, thermal expansion, support requirements, material handling and future maintenance needs.
From conceptual plant development and detailed engineering to brownfield modifications and facility expansions, we deliver coordinated piping design solutions that improve space utilization, simplify installation and contribute to efficient plant performance across the energy, oil and gas, chemical and industrial sectors.

Mechanical — Static & Rotating Equipment
We provide specialized mechanical engineering services focused on the integration of static and rotating equipment within complex industrial facilities. We address the engineering interfaces between process equipment, piping networks and supporting structures to ensure that equipment installations meet operational, mechanical and project requirements.
Our scope includes engineering assessment and coordination for pressure vessels, heat exchangers, centrifugal and reciprocating pumps, compressors, turbines and other critical plant equipment. We consider equipment design data, operating conditions, foundation interfaces, piping connections and applicable industry standards to establish technically sound installation and integration solutions.
A key aspect of our approach is evaluating the interaction between equipment and connected piping systems. This includes assessment of nozzle forces and moments, thermal displacement, equipment alignment, vibration, support loads and other mechanical influences that can affect equipment integrity and operating performance.
By integrating equipment requirements with piping and structural engineering, we help minimize interface conflicts, reduce equipment loading, improve installation arrangements and enhance overall plant reliability. Our solutions support new developments, facility upgrades and existing plant modifications across the oil and gas, petrochemical, power and process industries.

Process Engineering
Our capabilities cover process design, system evaluation and engineering documentation, including process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), process calculations, equipment sizing, hydraulic studies and preparation of process datasheets.
We undertake engineering assessments to evaluate flow characteristics, pressure and temperature conditions, equipment performance and operating requirements across interconnected process systems.
From conceptual process development and design optimization to capacity enhancement, debottlenecking and plant modification studies, we focus on identifying process constraints and developing practical engineering solutions. Our work considers process safety, operational flexibility, equipment integration, energy efficiency and compliance with applicable industry standards and project specifications.
Through close coordination with piping, mechanical, instrumentation and other engineering disciplines, we help ensure that process requirements are effectively translated into implementable plant designs. We support projects across the oil and gas, refinery, petrochemical, chemical, power and other process industries, contributing to safe, efficient and sustainable industrial operations.

Civil & Structural Engineering
Our approach integrates structural design principles, engineering calculations and practical construction requirements to develop structures capable of withstanding operational demands, environmental conditions and applicable design loads.
Our engineering capabilities encompass the design and analysis of industrial structures, pipe racks, equipment foundations, platforms, access structures, steel frameworks, support structures and reinforced concrete systems. We undertake structural assessments, foundation design, load evaluations and connection detailing, considering equipment loads, piping reactions, wind forces, seismic effects and other relevant loading conditions.
We emphasize the coordination of civil and structural engineering with piping, mechanical and other disciplines to ensure effective integration of foundations, equipment, pipe supports, structural members and associated facilities. Through systematic design reviews and engineering analysis, we address structural adequacy, stability, constructability, accessibility and efficient utilization of materials.
From greenfield industrial developments and detailed engineering to structural modifications, strengthening and brownfield projects, we develop practical solutions that meet project specifications and applicable international design standards. Our objective is to deliver durable, economical and construction-ready engineering solutions that support the safety, integrity and long-term performance of industrial facilities across the oil and gas, petrochemical, power, chemical and manufacturing sectors.

Electrical Engineering
Electrical engineering solutions that support the safe, efficient and uninterrupted operation of industrial facilities are an essential component of every plant. Our engineering approach focuses on developing reliable electrical infrastructure, optimizing power distribution and ensuring seamless integration of electrical systems with the overall plant design.
Our capabilities encompass electrical system design, power distribution studies, equipment specification, electrical load assessments, cable sizing, cable routing, earthing and lightning protection systems, lighting design and preparation of electrical engineering documentation. We support the engineering of transformers, switchgear, motor control centres, distribution panels, motors, generators and associated electrical infrastructure in accordance with project requirements and applicable industry standards.
We place strong emphasis on power system reliability, equipment protection, electrical safety and multidisciplinary coordination. Through systematic engineering assessments, we address load requirements, short-circuit levels, voltage drop, protection coordination, equipment selection and installation constraints to establish robust and dependable electrical networks.

Instrumentation Engineering
We deliver instrumentation engineering solutions that enable accurate process monitoring, reliable control and safe operation of industrial facilities. Our engineering approach focuses on developing integrated instrumentation systems that provide effective control over process variables, enhance operational visibility and support consistent plant performance.
Our capabilities encompass instrument selection and specification, control system engineering, preparation of instrumentation datasheets, instrument index development, I/O lists, loop diagrams, hook-up drawings, cable schedules and instrument location layouts. We support the engineering of field instruments, control valves, pressure safety interfaces, transmitters, flow measurement systems and process control architectures in accordance with project requirements and applicable industry standards.
We place particular emphasis on the seamless integration of instrumentation with process, piping, mechanical and electrical systems. Through systematic engineering reviews and multidisciplinary coordination, we address instrument accessibility, measurement accuracy, control philosophy, signal interfaces and installation requirements while identifying potential design conflicts at an early stage.
From conceptual engineering and detailed design to plant modifications, system upgrades and commissioning support, our solutions are developed to improve process control, operational safety and system reliability. We support instrumentation requirements across the oil and gas, refinery, petrochemical, power generation and process industries.
How We Support Our Clients
One process, from first principles to delivery
Fundamental Engineering Design
First-principles-based design and engineering analysis.
Documentation & Compliance
Robust design documentation and compliance support.
Onsite & Offshore Consultancy
Engineering support at your site or offshore from our engineering offices.
Deliverables
What you receive
Piping Stress & Supports
| Engineering Deliverables | Description |
|---|---|
| Piping Stress Analysis Reports | Code compliance, sustained, expansion, occasional and operating stress evaluations |
| CAESAR II Models | Developed and validated piping stress analysis models |
| Load Case Matrix | Operating, design, hydrotest, wind, seismic, relief and other applicable load combinations |
| Equipment Nozzle Load Reports | Evaluation of loads on pumps, compressors, turbines, vessels and heat exchangers |
| Pipe Support Design Calculations | Design verification of restraints, guides, anchors, shoes and special supports |
| Spring Support Calculations | Variable and constant spring selection, sizing and load evaluation |
| Support Drawings | Standard, special and engineered support fabrication drawings |
| Structural Load Data | Support reactions and load inputs for structural engineering |
| Flexibility Analysis | Thermal expansion, equipment connectivity and piping flexibility assessment |
| Dynamic Analysis Reports | Modal, vibration, slug, surge, water hammer and other applicable dynamic assessments |
| Flange Leakage Assessment | Flange integrity and leakage evaluation |
| Stress Isometric Mark-ups | Stress-critical locations, restraint requirements and support modifications |
Piping Design
| Engineering Deliverables | Description |
|---|---|
| Piping Design Basis | Design codes, materials, design conditions and engineering criteria |
| Piping Material Specifications | Piping classes, material selection, rating and component specifications |
| Piping General Arrangement Drawings | Equipment and piping arrangement plans and sections |
| 3D Piping Models | Intelligent 3D models incorporating equipment, piping, valves and inline components |
| Piping Isometric Drawings | Fabrication and erection isometrics with dimensions, welds and material details |
| Piping Layout Drawings | Unit layouts, equipment layouts and piping routing plans |
| Piping Material Take-Off (MTO) | Line-wise and bulk material quantity estimates |
| Piping GA and Sections | Detailed arrangement drawings with elevations and coordinates |
| Pipe Support Location Drawings | Support identification, locations and installation details |
| Underground Piping Drawings | Underground routing, profiles, crossings and trench details |
| Tie-in Drawings | Existing-to-new piping connection and modification details |
| Valve and Specialty Item Schedule | Valve lists, specialty item lists and piping component schedules |
| Piping Line List | Line numbers, sizes, specifications, design conditions and insulation details |
| Piping Isometric Bill of Materials | Component-wise material quantities for procurement and fabrication |
Mechanical — Static & Rotating Equipment
| Engineering Deliverables | Description |
|---|---|
| Mechanical Design Basis | Equipment design requirements, codes and applicable standards |
| Equipment Datasheets | Technical datasheets for static and rotating equipment |
| Equipment Specifications | Technical specifications for procurement and vendor evaluation |
| Equipment Requisitions | Material requisitions and technical enquiry packages |
| Technical Bid Evaluation | Technical comparison and evaluation of vendor offers |
| Equipment Layout Drawings | Equipment positioning, orientation and maintenance clearances |
| Pressure Vessel Calculations | Shell, head, nozzle, reinforcement and thickness calculations |
| Heat Exchanger Specifications | Thermal and mechanical design requirements and datasheets |
| Pump Specifications | Hydraulic and mechanical requirements, operating conditions and performance criteria |
| Compressor & Turbine Specifications | Performance, mechanical, utility and interface requirements |
| Mechanical Equipment GA Review | Vendor drawing review and dimensional verification |
| Nozzle Load Evaluation | Assessment of external loads and allowable nozzle loads |
| Equipment Foundation Load Data | Static, operating, dynamic and maintenance load inputs |
| Vendor Document Review | Review of drawings, calculations, datasheets and inspection documents |
| Equipment Inspection & Testing Documents | Inspection plans, test requirements and technical review records |
Process Engineering
| Engineering Deliverables | Description |
|---|---|
| Process Design Basis | Design philosophy, process requirements and operating criteria |
| Process Flow Diagrams (PFDs) | Process flow, operating conditions and major equipment representation |
| Piping & Instrumentation Diagrams (P&IDs) | Detailed process, piping, instrumentation and control representation |
| Heat & Material Balance | Mass balance, energy balance and process stream calculations |
| Equipment Process Datasheets | Process design information for vessels, pumps, exchangers and other equipment |
| Line Sizing Calculations | Hydraulic sizing of process, utility and relief lines |
| Hydraulic Calculations | Pressure drop, velocity and flow distribution calculations |
| Pump Hydraulic Calculations | Pump head, flow rate and operating requirement calculations |
| Control Valve Sizing | Control valve capacity, pressure drop and selection calculations |
| PSV Sizing Calculations | Pressure safety valve sizing and relief scenario evaluation |
| Relief & Flare System Studies | Relief load estimation, network hydraulics and flare system evaluation |
| Utility Consumption Summary | Plant utility requirements and consumption estimates |
| Process Operating Philosophy | Startup, shutdown, normal and emergency operating philosophies |
| Cause & Effect Diagrams | Process safety interlocks and control logic documentation |
| Operating & Control Narratives | Process control descriptions and operating sequences |
| HAZOP / HAZID Documentation | Hazard identification, risk review and recommendation records |
Civil & Structural Engineering
| Engineering Deliverables | Description |
|---|---|
| Civil & Structural Design Basis | Design codes, loading criteria and design philosophies |
| Site Grading & Development Drawings | Site levels, grading plans and drainage considerations |
| Geotechnical Design Inputs | Foundation design parameters based on soil investigation reports |
| Foundation Design Calculations | Design of equipment, tank, pipe rack and building foundations |
| Foundation General Arrangement Drawings | Foundation plans, sections and reinforcement details |
| Structural Analysis Reports | Structural calculations, stability and code compliance |
| Structural Steel GA Drawings | Structural arrangement, elevations and sections |
| Pipe Rack Design | Pipe rack analysis, framing arrangements and structural detailing |
| Equipment Support Structures | Structural supports for vessels, exchangers, platforms and equipment |
| Steel Connection Design | Bolted and welded connection calculations and details |
| Reinforcement Drawings | RCC reinforcement detailing and bar bending schedules |
| Concrete & Steel Specifications | Material specifications and construction requirements |
| Platforms, Ladders & Access Drawings | Access platforms, walkways, stairs, ladders and handrails |
| Underground Utility Drawings | Trenches, culverts, drainage and underground service structures |
| Structural Material Take-Off | Steel tonnage, concrete quantities and reinforcement estimates |
Electrical Engineering
| Engineering Deliverables | Description |
|---|---|
| Electrical Design Basis | Electrical codes, design criteria and system philosophy |
| Electrical Load List | Connected load, operating load and demand calculations |
| Single Line Diagrams (SLDs) | Power distribution and electrical system configuration |
| Electrical Load Flow Studies | Load flow, voltage drop and power system assessment |
| Short Circuit Studies | Fault level calculations and equipment rating verification |
| Motor Starting Studies | Motor starting performance and voltage dip assessment |
| Electrical Equipment Datasheets | Transformers, motors, switchgear, MCCs and distribution panels |
| Electrical Equipment Specifications | Technical specifications and procurement requirements |
| Power Cable Schedules | Cable sizing, selection and routing information |
| Cable Tray Layout Drawings | Cable tray routing, sections and installation details |
| Electrical Equipment Layouts | Substation, switchgear, MCC and equipment arrangement drawings |
| Earthing & Grounding Layouts | Grounding grid, equipment earthing and bonding arrangements |
| Lightning Protection Layouts | Air terminals, down conductors and protection arrangements |
| Lighting Layout Drawings | Indoor, outdoor and emergency lighting arrangements |
| Illumination Calculations | Lighting level and fixture selection calculations |
| Electrical Installation Details | Cable termination, trench, gland and equipment installation details |
| Electrical Material Take-Off | Cable, tray, earthing and electrical equipment quantities |
Instrumentation Engineering
| Engineering Deliverables | Description |
|---|---|
| Instrumentation Design Basis | Instrumentation codes, design criteria and control philosophy |
| Instrument Index | Complete instrument tag register with technical details |
| Instrument Datasheets | Technical specifications for field instruments and control devices |
| Instrument Specifications | Selection criteria and technical requirements |
| I/O List | Analog, digital and communication signal listing |
| Instrument Location Layouts | Field instrument positioning and accessibility drawings |
| Instrument Hook-up Drawings | Installation details for pressure, temperature, flow and level instruments |
| Instrument Loop Diagrams | Complete instrument signal and connection representations |
| Instrument Wiring Diagrams | Field, junction box, marshalling cabinet and control system wiring |
| Cable Schedule | Instrument cable identification, sizing and termination details |
| Junction Box Schedule | Junction box identification, terminal allocation and cable details |
| Instrument Cable Routing Layouts | Cable tray, trench and instrument cable routing |
| Control Valve Datasheets | Control valve sizing, specifications and selection |
| Orifice Plate & Flow Element Calculations | Primary flow element sizing and differential pressure calculations |
| Instrument Air Distribution Drawings | Instrument air headers, tubing and distribution details |
| Control System Architecture | DCS, PLC, SIS and associated system architecture |
| Cause & Effect Diagrams | Instrumented safety functions, trips and interlock matrices |
| Alarm & Trip Schedule | Alarm limits, trip set points and associated actions |
| Instrument Material Take-Off | Instrumentation equipment, cables, fittings and installation materials |
